Hello everyone again. I have some good and bad news haha. The good news is the back office pc has sprung back to life with no work done to it. I just pressed the power button and after 30 seconds or s...

Hi, Mix and match is pretty complex on the Uniwell, but it does sound like you have pretty much worked it all out for yourself. I think the only thing you might be doing wrong is the discount type, it...

Its tricky as hell to get right, if you get no where then try the exact same thing but just hold the top right whilst turning back on as opposed to trying the double press thing - that used to work on...

Thats right, that can happen with the beeping etc - give the below a try, it might take a few attempts until you get it just right so persist with it: Turn the power off by either the socket or the sw...

I'm gutted for you because you have as you suspect lost all of your hard work, the battery on the mainboard is the backup for the program and is the only real reason a battery is needed. The till will...

Hi Keith, Did you get what you needed with the manual and code etc? Cheers

Hi There, It sounds like you are in a real pickle my friend but can you just confirm, was it the fully working and programmed terminal that you removed the battery from? and it is this one that is now...

Djmonster I would love to know everything about these systems as I think they are the most amazing epos system ever invented. Back in the day it was way ahead of its time with the flow meters and scat...

Hi, Yes it will be the till itself that has lost the comms settings. Do you know the engineer code to access the programming menus? If so ill list the settings for you. Cheers

Hi Are you familiar with making changes to the system function flags directly on the till? If so it is likely to be your comms settings and the board rate. Let me know if you need more specifics as I ...

Hi, I've private messaged you some info. Cheers

Hi Mike, Is the replacement machine the same model as all the other machines? How are they connected, is it by Ethernet network? When you say it isn't being picked up by the others what do you mean an...

Hi there, Do you have a button on your touchscreen anyway called 'system operation'? Or are you able to place that key on the touchscreen somewhere using the programming utility? If so this can be res...

Hello, I'd love to help but unfortunately am nowhere near Kent Just looking back over your post though things may not be quite as bad as you think 1. Cash Drawer - Most standard cash drawers tend ...

Hi, Unfortunately that is right, there is no better way to do it on this model. Do you have a manual and do you know how to go about setting it up? Cheers