Try setting it as a tmt88. Many printers not listed in icr will interface like an epson.

If your just sending updates it could be the plus you changed are no longer flagged for update for some reason. Try going to the communucate menu in TC, select send data, make sure plus is ticked, the...

They're software developers and so their support forum is for dealers and for us engineers only im afraid. Customers looking for support should seek it from the dealer who sold and programmed their ti...

ICR does support TCIP printers nowadays. I suggest when you're having problems running a ping test from your till to the KP.

The cash drawer flag needs to be set to the device on whichever com port you're TMT88 is connected to. If it then doesn't kick it's probably the fact it's in demo mode.

There are a few 560's in the UK. Quite an old machine unfortunately and in my experience the back light can go wrong after a couple of years. Sounds like this may be the problem.

Once you've changed the flag, make sure you press the X key to move on to the next flag. If you press the clear button without pressing X first then it will not save the changes. I think. Been a while...

I like the way ICR works. It's simple to manage stock sizes and prices on the till, and if you you want to go further then the back office software is quite a good tool for managing stock. ICR Touch h...

Key function text is only for reports on total control. You will have to use sp124 to change the media text to match what you have in total control if you want it to show on your receipts.

Yeah It's probably set to DHCP instead of static, I:E the engineer doesn't know his onions. all IP printers should have static IP addresses or they can change if they are switched off and on again Rob...

Three things usually cause this. Loose connection between screen and main board. Faulty inverter Liquid damage on the main board.

Thanks for the replies folks. It defo looks like we will be going down the ICR Touch route. Do you know if IRC Touch has the ability of having a "Training mode" whereby you can sign-on - m...

Sounds like the baud rate is wrong in the till. What does the baud rate say for the setup condition print out?

Make sure all connections between printer and till are secure. Most likely a faulty thermal head tho, in which case you'll need the printer repaired or swapped out. If you had a ux7000 for spares and ...

If you do that you will create a lot of work for yourself. Wouldn't advise it unless your experienced at uniwell programming. You may find it easier just to clear PLU's and reprogram them, the keyboar...