Just curious as to how DOA the UP360 are. If you turn the power switch off. Then hold the paper feed button down as you power the printer on again and if it prints out a receipt then there may be hope...

By default Casio's IP addressing jumps from 192.168.0.1 for the Master to 192.168.0 50 for the Second terminal. To check these or change these you will want to go into the "System Connection"...

http://cashregistersite.com/extract/How_to_set_up_CV22.htm I would have it in REG Mode when you try to communicate. I have some videos her that might help. http://cashregistersite&...

http://cashregistersite.com/communication-errors-ezp-3.html Kevin

I'm also guessing the CT 1 you noticed on the receipt was actually the item count. Am I right? I mean if the customer bought 3 items would it say CT 3? Kevin

To program a MENU key: Mode <PGM4><1. Keyboard><1. Key Assign><064. Menu>Press the key you want to program. Then hit escape. escape. escape At this point if you press the key ...

John, It sounds like you have a back up loaded on your CV33 program. Please do a backup to the CF card also. Next: Remove that CF card. Reinitialize the machine. Is there a way you can check connectiv...

I'm not to experienced with that model, but most all Casio work basically the same. I would first do (1) A backup on to a CF card. (2) A flag clear. When the FC receipt prints out you should see the ...

I would go into the "Manager Mode" and do a "System reconfiguration." Kevin

Its called an "init2" procedure. But firstly I want to say that any report can be stopped from printing by pressing the "escape" key (ESC) two or three times.

Yes I personally had this happen to me. Programmed a TE2400 and shipped it to customer. When it arrived the displays did not work. Called Casio and they said they had a lot of these issues and it was...

You will need to open it up and reseat the ribbon cable for the display. Use some tape to hold it in place.k Kevin

What business type are you running? Retail or restaurant? Also what country? Kevin

The FLAG CLEAR procedure will clear the QT-6000 out of virtually any locked condition. It is also necessary to do any time I/O PARAMETERS are changed. If you are in the middle of a transaction, that p...

Could you please press: Mode <PGM3> <6. Scheduler> And tell us if you see anything scheduled for the time frame? Also check here