plm 2000 does not support the dx895 or the dx915 you would need unibos for those

the most likely problem here is that the screen has been damaged/worn out the clear key position is normally the most used so will wear out first , new screen required i'm afraid

you cant it only has 2 adjustments you could use percentage disscount if that fits what you want ?

I think the thing to remember here is that the £1000 will get you a dedicated bit of kit designed to do the job connecting a "laptop" and viewing the output in hyper terminal will give you n...

adjustment rates are in sp153 percentage rates are in sp151

yes if you get some basic settings in it you should be able to use the good one to program the rest

setup required means it has lost it program and requires setting up the keyboard is probably not working as it has defaulted back to the engineers keyboard

unplug everything from the network reset all the tills and printers plug everything back in perform a sp8800 initialise network that should sort it

I'm with Nemesis and Stato do it do it do it now! there will be no time later!!

the clerk id will be ABOVE the number 9 on the F0 keyboard

have you tried reseting it?

the Nx5400 does not use a m key you need a MA key like the one in the picture marked 3 and 5 (its the same key)

I think your going to nhave a bit of trouble here although there is free software for programming (plm2000 although limited on what till it supports) I am not aware of anything free that will allow yo...

I'm not aware of any setting that would turn the time off on the receipt I think thats a fixed function

Hello I am afraid the bad news is you can't change the sizes within a lookup. the button sizes within the lookups are tied to the available space within the look up. You can only adjust the button siz...