Hello basically your till has lost it's program and needs setting up from scratch You may be best off getting someone in to sort it for you depending where you are I may be able to point you in the di...

Hello the memory allocation is assigned under sp112 maximums but be carefull what you change in here as you can end up wipeing out half your program. your second problem is simply the natural behavio...

Hello You have probably only got 25 setup in the memory allocations go to sp112 (maximums) and you should be able to up the number from 25 assuming you have enough memory availible

you would need to use the manual cooking message this will attach to the item going to the kitchen

Hello a few potential problems here 1. where did you get the serial cable from? it is not a standard pc serial cable and normally has to made up specifically so if you didnt get it from a dealer or ma...

Hi WM-#46 CLERK IS BEING USED Sign off the clerk in R position. Then sign on the clerk again in the appropriate control key position by entering clerk code and pressing CLERK ID key. (displayed when Z...

try key to SP log on using engineers code select irc program functions type 8800 enter enter again till should count to 32 then print out a bit of paper listing all your tills that should sort it

ah thats an easy one Its a temp files used for price editing and will self re create explore into c: uniwell/eposoffice/data/site0001/net0001 and cut out both EDPRI.DB EDPRI.PX if you have more than ...

try setting system flags sf60 bit g to yes sf86 bits h,f,a to yes

you will need a usb to serial converter inorder to connect your laptop to the serial port on the till be warned though that some converters will not work with the till. things to check regarding your ...

first create you option plus in sp122 add then into condiment groups in sp125 (same as doing lookups) then attach the condiment to the plu in sp122 by puting the number of the condiment group in one o...

it should be fixable what .db files does it say is corrupt?

have you tried sp8800?

you would need ethernet boards fitted, possibly a eprom & flash upgrade but you would still need something to translate the output as what comes out of the till does not look like the report you g...

plm 2000 does not support the 06 model tills