it is a strange one not seen this before hmmm.... just realised i posted this in the wrong bit! Might end up selling it as is if it cant be fixed

I hate any sharp that starts with "XE" you know what I mean lol, anyway received this as part trade in from a customer that got a 420... this XEA301 has one character on the display (third o...

as jacky-s said above,just to note you only have 5 auto keys so you would need to decide what 5 you would use them for i.e one for your 100 X TL, one for your 100 . X TL etc, re assign them on the key...

Ah this is a simple fix, we need to change the programming of the cash key to open the drawer heres how: Turn key to PGM2 go down to "setting", hit enter, go down to "media" hit en...

Cheers Porty, still mis behaving! got the manual for the scanner with a million settings

Im using the attached scanner sheet, what settings / program mode on the register should I use again, i.e turn key to SRV or PGM etc, yeah its a strange one defeats the purpose of "speedy" r...

Absolutely, wasnt the easiest thing to get a hold of to be honest!!, I'll try it on a UP700 see if it does the same with that......

Tried an external power supply, didn't resolve the issue hmmmm must be some setting that needs to be changed....

I'm not no ill give that a try, think ill need to disable power going to it from the register first??

Yeah they lines are like that too

yup line 923 is is all the zeros

Yeah using port 8 its at the front, Ill print them out the noo.......

Been messing about with a 450S Got the scanner (Voyager MS9540) all up and running with the register defaults i.e 4800 Baud Rate, 7 Bits, 1 Stop bit, ODD Parity, Programmed in a few bar codes, all whi...

Absolutely! The customer I supplied this to phoned up explaining the fault, so got them to post it back to me.....it worked absolutely fine! thinking it was perhaps a human error, then after a week le...

Think you need to key the time in first i.e press 1345 (if that was the time in 24hr format) then press the #/ST key.................... All in the PGM mode