Hi, Setting up you Major Groups: 1. Turn the S key to the 'SP' position. 2. Log on, you'll probably need the engineer code. 3. If the till then shows these 2 buttons...[Prog Funcs] & [IRC Prog Fun...

Hi, Before you start programming you will need the following info: 1. What your Major Groups will be - You can have 8 of these groups and these are used for sales reporting. 2. What your Groups will b...

Hi, Just a couple of questions to get us going: 1. What other kit did you get with it, ie Printers, cash drawer etc? 2. Has it already got a program in it? Irdone.

Hi Ben, I'll PM the RAM clear instructions to you. Irdone.

Hi Ben, I think you may be right. Sounds like this could be a hardware fault or spillage damage. I've got to ask, have you tried doing an inital reset? As a last resort, you could try a RAM clear - Th...

Hi jsi, Ok, here goes...... Setting up percentages: 1. Turn the lock round to the 'SP' postion and sign on with a managers/supervisor code. 2. Press [Program Funcs]. 3. Key in 151 and press [Enter] -T...

Hi, No problem, I'll post back later this afternoon. Irdone.

Who is this super hero? sarge? NO! Rosemary the telephone operator? No way man! Henry the mild mannered janitor? COULD BE! I-R-Done, number one super guy. I-R-Done, quicker than the human eye. Oh, hes...

Hi jsi, You can use Percentage buttons - There are 3 available and each can have a different % value. Watch out though as these can be set to add the value which may not please your customers You c...

Stato....thanks for correcting that, looks like a made a typo Irdone.

Hi Billy, Ok, it sounds like the best (and easiest) option would be to use the Adjustments feature. Shifting to another price level is a bit more involved. I'm going to assume that you are not already...

Hi Billy, Just a couple of questions: 1. Do you have back office software and if so what is it? 2. Your free staff splashes - How do you want this to be shown in your sales reports? 3. Your free shots...

Hi Billy, If nobody else replies, I will be able to post some details tomorrow afternoon if you can wait. Irdone.

Hi, So, you can collect information but when you send data you get a failed message. Have you tried just sending something simple, like the Date & Time to see if that sends without the error messa...

Hi, Try this..... 1. Turn the key to the 'X' position. 2. Sign on using a managers/supervisor code. 3. Press [Program Funcs] - If this does not appear see my note below. 4. Highlight Clerk I-Buttons a...