There is a common fault with the px 57xx series till drawers where the micro switch arm breaks off, thus causing the till to believe that the drawer is open even when it is closed. There is an option...

Yes you can. Do you have any back office software that you are using to take reports and program the tills, or do you program manually on the till? Either way you will need to allocate a menu level fu...

PM sent

The ESF memory is the Electronic Journal. This records all of the keypresses on the till. very similar to the old twin printer tills (one for receipt, one for journal). Clearing the memory and any ope...

Does it display SET UP REQUIRED on the customer display?

Set System Function Flag 91 so that bit A is set to yes. Also set System Function Flag 86 set Bit H to Yes. Connect printer to Channel C.

You will need to add a Modifier 2 Key onto the keyboard layout. This can be done by accessing the Keyboard Layout option in the SP position. Turn M Key to SP Login with Clerk Code Select SP-110 Flexib...

To change from the flat keyboard to the conventional keyboard, turn the control key to (SP) and simultaneously hold down the three keys (horizontal) on the left hand side of the keyboard, five rows up...

Key Character Layout

I have sent you a PM.

It could be the Baud rate on the till not matching your baud rate in PLM. Firstly I would recommend setting your baud rate to 38400 bps in the network settings tab of PLM. Then set the baud rate to 38...

When the optional ESF memory is near full the 2nd PRICE and STORE lamps will flash. The ESF memory near full condition can be cleared by issuing Z-79 report. When ESF memory becomes full, the data fir...

The TX-870 can be programmed manually using the SP position on the keylock. You will need an S key to access this position though. If the till has a standard program in, you will be able to log on usi...

You can clear down the tracking area by taking a Z81 report from each till. This will close any open tracks. Be aware that this will also clear any bills that have transactions stored on them, best t...

Turn M key to SP, log on with Manager ID Select Program Functions Scroll down to SF-90 Communication (3) Highlight the line "with journal data transfer", make sure this is set to "0&quo...