Where do I get HyperTerminal? Hi Watch your Windows XP carefully . WinXP comes with Hyperterminal. But you will need a RS-485 to USB converter and detailed knowledge about the communication protocol....

Hi I can only guess but it seems that this is not a regular PC monitor. Very unlikely that a video signal is generated in the till since this is difficult with longer wires. I think it's more a termin...

Hi again I tried to get some information but the n9902 command does not work at all. When I try to hit the dot I just get a beep. I tried 99 "X" "00" in key position "X" ...

Hi OK - I will check that. In case the firmware is on a EPROM. I can get these chips and we also have a programmer. Is this Firmware available as a HEX-file to be burned on the EPROM? Best regards Onk...

Hi I am not a specialist at all but I will try to explain the situation. We got a UX-45F from a restaurant here in Germany to be used for events of our local fire brigade. The UX-45F has a firmware in...

Hi This seems to be regular in this damned DDS firmware. IS there anyway to get the original firmware to be able to use the PLM tool to program the cash register? I am fed up with this firmware and I ...

Hi I am trying to change some articles on my UX-45F with DDS firmware. It seems that the character map on the template does not match with the charaters shown on the display. Coud this happen, when I ...

Hi I have a UX-45F with DDS firmware installed, so I cannot use the PLM2000 software to program the unit. We (fire brigarde department) got the cash register from a restaurant to use it for local even...

Hi again I am a little bit further with my investigations. It seems that my UX-45F is using a special firmware called DDS 1.3. That's why I cannot program it with the PLM2000 tool. I learned that a so...

Hi I managed to download the PLM2000 utility through the website mentioned here in the forum (thanks so far for this info). But I am getting timeout messages when I try to connect. using the date and ...

Hi I have the same cash register and a similar problem. I can hardly programm it on the register itself. The previous owner has about 370 articles programmed which I want to get rid of. I heard that t...