Hi all, I normally work with Uniwell tills at work, but someone has asked if I could program a TEC FS-1650 for them. They have told me that it has to be done on the keyboard. Is there any software out...

Hi, I have made the cable and it works fine on SX-700/800 tills, I have also found out which is the correct port to plug in to. I have matched the flag setting on the till with PLM settings but with...

Hi all, I have found a UX45F(off the side label) hidden away in a store room at work, have pluged it in and it works fine, it even had the user manual (which says UX45-05 on the front) in the cashdraw...

Hi all, Can anyone tell me if it is possable to change the keyboard between two layouts. ie: if we sell different products during the day, to the ones sold at night could I program the keyboard with ...

Hi, I also had this problem , so I made up the lead myself . You can purchase the connections from Maplin or RS . Mick

Hi, Yes the till use to allow you to turn it on/off. Cant remember changing any flags. See PM Mick

Hi, Not sure what you mean by a ram clear ? but the machine was running ok the last time it was in use. Mick

Hi, Printout looks like ths: ******************* SX8500-HMS V1.03 6DF1 1966879 PCTL-03 V1.02 38FF ***********...

Hi, All set to NO. Mick

Hi, SF35 all say NO SF36 all say NO Mick

Hi, It,s a single wide thermal printer. Mick

Hi, I do this each time I make a chnge I still get the same problem . Mick

Hi, ALL say NO Mick

Hi, Does not print or show on screen anything. Mick

Hi, Did that and the buffer print was the same. Mick