UX-40F programming help !

Hi,

Reprogramming this model of cash register can be quite a big job but it's simple enough once you get going.

Heres a couple of things to get you started:

Changing a PLU name:

Turn the key to SP
Key in 202
Press X2
KEy in the PLU number of the key you want to change
Press . (Decimal Point)
Type in the new description using the Alphanumeric keyboard.
Press CASH to accept
Press Cl Twice
Turn the key back to R to finish

Changing a PLU Price:

Turn the key to Z1/P
Key in 305
Press the X2
Key in the PLU number of the product you want to change
Press . (Decimal Point)
Key in the new price (Without the decimal point)
Press X2
Press CL twice
Turn the key back to R to finish

Hope this helps for now, please let me know how you get on let me know if you need any assistance.

Also, Please check your private messages for some additional info.

Kind Regards

EPoS Wizard

Now started programming but

would you know how to stop the PLU report dump once it has started ?! (report 88) , we only use something like 60 buttons but the report lits all the blank ones and is up to number 400 , and I understand it coudl go up to the maximum (2800) PLUs

Thanks

John

Hi John,

You can do an Initial Reset to stop it once you have the informaton you require, do this as follows:
Turn the key to Off
Hold down the first 3 keys in a row on the 3rd row up from the bottom left hand corner of the keyboard, depending on which keyboard you have it will be either keys 4, 5 & 6 on the top picture below, or TTL 3, Track # & 4 on the bottom picture below, regardless of what you have on those keys it's still those positions:

Hold all 3 keys down firmly and quickly switch the key round to the SP position, the cash register should give out 3 quick beeps, you can now release those 3 keys and the report shoould have ended.

Hope this makes sense,

Regards

EPoS Wizard