UP 700 Master Till

get your MA key .cut off small ankle. it willbe SRV key

Thanks have done and have now gained access to the service menu!

I accessed the 3rd option which mentions IRC set up and found where it has the different IP address which I was trying to change to make it the same as the other two tills but when I changed the code and scrolled down and tried to press enter it would come up with entry error and wouldn't then change it to the code I set.

Also I messed up by, when having a look at the original master till to try and see why it wouldn't save I accidentally set it as a standalone till and then when I try to reset it as a master till it keeps coming up with the message entry error.

Any ideas where I am going wrong guys?

Hi. Hope this helps.
First of all, reset the IRC on all three machines. Then set up the slaves first. Starting at machine 3, choose 'Satellite' from the 'Terminal Setting' menu, then give it the IP address 192.168.0.3 (it doesn't matter what IP address you give it, but from MRS the address always has the first three block of numbers as'192.168.0.')
So, put the address in, then choose the options you want (note if you choose centralised clerks then the clerk file remains on the master till and the slaves look to it for clerk info), then press the CASH/TL button. Do the same on machine 2 (except IP address which will be 192.168.0.2).
Finally machine 1. Choose 'Master' from the 'Terminal Setting' menu. Set everything the same as the other two machines (except IP address which will be 192.168.0.1). Press Cash/TL. The master will now ask for the numbers of the slaves. The first blocks of the IP address will be the same (ie 192.168.0), so for the last block put in 2, then press Cash/TL, then same again but put in 3, then Cash/TL. Then press Cash/TL again and the master will go through the file set up process.
To download the till info to the new slave use the download option in SRV. Finally, do an 'Open Store' in PGM mode on the master to make sure T-Logging starts.