Welcome to EpoS Wizard!
Hello everybody,
i just got a Sharp UP-X200 and an UP-X300. First problem is that the language for the POS programm is french. In the backoffice i just found keyboard input in several languages and OS language (Win CE, it was forced to US). Can i change the language of the Sharp POS programm or do i need a CF-card image of a german UP-X300? And how can i access the UP-X200 for settings? There is no MainScreen.exe in Windows 
Regards from Germany,
Benjamin
You'll need to try and source a German version of the POS programme. There isn't an option to change language, at least not in the UK version. I'm not sure where you would source a German version from though, although a local dealer should be able to help.
As for the X200. After the initial set up, all POS settings for that are controlled from the X300 back office program.
Thank you porty for the quick response!
I know a dealer who can upgrade the CF card to the latest version in german. Problem one solved. 
You'll need to try and source a German version of the POS programme. There isn't an option to change language, at least not in the UK version. I'm not sure where you would source a German version from though, although a local dealer should be able to help.
As for the X200. After the initial set up, all POS settings for that are controlled from the X300 back office program.
At the moment the UP-X200 boot and shows fench language. After connecting it to a german UP-X300 it will get that data and tha language will be german? That would be fine!
Anybody here who have a setup quide (english) for UP-X200 and 300?
Thanks,
Benjamin
The X200 has it's own application that has to be installed, but your dealer will be able to give you that too. Just make sure both versions are compatible!
Here is the set up guide for the X200 to connect to an X300 that has already been configured.
X200 Set up
1. Push Reset key at the back of the X200
2. X200 should Power OFF and stay OFF
3. While power is off hold down key number “5”
4. At the same time as holding down the 5 key press the “power on” button (above the 9 key)
5. From the menu displayed, select 8 clear registry
6. After finishing select “0” to EXIT enter any key to continue
7. The X200 should now reboot
8. Upon reboot select the Master Reset key and enter password (13974682)
9. Select GOTO CE Desktop
10. Through windows explorer go to the FlashDisc on your X200 and delete all the files and folders
within FlashDisc
11. Set up the Network settings.
12. Once your network is established you are ready to insert the USB stick containing an X200 folder
in the root
13. Insert USB with the “X200” folder in the root
14. Drop the X200 into Windows Explorer with the USB inserted (may have to use reset button on
the back and select MRS then GOTO CE Desktop)
15. Select Hard Disc from Windows (Hard Disk is the USB)
16. Select the X200 folder
17. Run the X300_Start_up application within the X200 folder
18. Follow the on screen selections pressing OK
19. When the process of up loading data from the X300 Server has finished the X200 will ask to be
rebooted.
20. Power back to ON and the system should be configured, and data should be synchronised with
the X300 Server.
NB Ensure no other AP’s with same IP in range; make sure IP of X200 is set on X300 Master Terminal
list.
Thank you!
