Welcome to EpoS Wizard!

As you’ll no doubt have noticed if you’ve previously visited any time in the last decade or two, EPoS Wizard has undergone some quite drastic changes!

YOU WILL BE REQUIRED TO CHANGE YOUR PASSWORD
(See below if you are unable to receive a password reset request)

Read on »

Share:
Notifications
Clear all

CV32

6 Posts
3 Users
0 Reactions
2,019 Views
Posts: 8
Topic starter
Active Member
Joined: 13 years ago

Can any one tell me how to copy the information from the QT6000 to the CV32 software so I have the updated information on the PC end.

Thanks, James.

Reply
5 Replies
Posts: 36
 ansh
Eminent Member
Joined: 16 years ago

Hi

There are several ways to do this on the CV33 that I use. Would guess that CV32 has the same options.

First do a flag clear so that you know what IPL's on your till.

Then make a new branch on CV32.

Then you can either:
1. connect your pc to the till with a serial cable and load the .090 file from the till

2. save the .090-file to the CF-card on the till, connect a cardreader to your pc and import the .090-file from the CF-card to CV32 via File - options "load .090"

Regards
Ansh

Reply
Posts: 8
Topic starter
Active Member
Joined: 13 years ago

Thanks Ansh, I will give this a try next time I am in there. Thanks.

Reply
Posts: 8
Topic starter
Active Member
Joined: 13 years ago

Silly question, where is the card slot on the qt6000 and how do I load the info onto it? !what

Reply
Posts: 198
Estimable Member
Joined: 15 years ago

The CF Card slot on the QT6000 is on the top of the unit. They moved it to the left side on the QT6600

Kevin

Reply
Page 1 / 2
Share: